Filter
Top Products
Polycom RMX 1000 User Guide
11-7
Parameter Description
Server Port
Provides the connection port of SIP server for registration
service.
Server Domain Name
Provides the domain name of SIP server for registration
service.
User Name
User name provided by the SIP server for the registered
user.
Password Password matched with the user name.
Outbound Proxy
Server
For communication with the SIP server when the RMX
1000 system is configured on the internal network, an
outbound proxy server is required to implement traversal
of the firewall/NAT. In this case, you need to set the IP
address and port number for the outbound proxy server.
QoS
Quality of Service (QoS) is very important in transmission of high-bandwidth
audio and video data. You can use QoS to test and guarantee the following
parameters:
• Average packet delay
• Delay variation (jitter)
• Error rate
In the IP Network Services interface, click QoS to configure the QoS
information.
Figure 11-6 IP Network Services - QoS
The table below explains the meanings for all QoS parameters.
Table 11-5 QoS Parameter Settings
Parameter Description
Enable
Select this option to enable configuration of the QoS
settings. When un-checked, the system uses the default
QoS settings.