Polycom 3150-16966-002 Server User Manual


 
Chapter 9 – Conference/Participant Monitoring
9-6
To set the site name:
1 In the Conferences list pane, double-click the desired conference.
2 On the conference parameter interface, click Site Name to enter the
site-setting interface. Select the Always show site name check box, and
set the related parameters. You can set Font Size and Display Position.
In the video switching conference mode, you cannot set the conference Message
Overlay or site name.
Participant Monitoring
Figure 9-2 Participant Monitoring Pane
When a conference is ongoing, you can view detailed status and properties of
each participant's endpoint and perform related setup and operations
through the Participants list pane.
Viewing Participant List
Click an ongoing conference in the conference list. The list pane then shows
all the participants connected to the conference and those not connected to
the conference but added to the participant list.
Table 9-3 Description of Participant List Parameters
Parameter Description
Name
Displays the name and type of the participant:
Audio Participant
– Connected to an audio user
Video Participant
– Connected to a video user
Recording Link