Filter
Top Products
5-1
5
Recording Link
The RMX 1000 supports the recording link function. It can work with the RSS
2000 to record conference content. After the recording setup is completed,
when the conference starts, the RMX 1000 will first call the participants in the
participant list, and then call the configured RSS 2000 to record the
conference. The recording link is displayed in the List pane as a regular
participant, thereby enabling users to view and control the recording status
easily.
To record a conference running on RMX 1000 through RSS 2000, configure
the related parameters according to the procedure below:
1 Configure the information of RSS 2000 to be connected in the Recording
Link interface. For details, see the text below.
2 The profile used for the conference has enabled the recording function.
For details, refer to Conference Recording.
Recording Setup
In the RMX Management pane, click Recording Link. The Recording Link
interface appears in the list pane located on the right side. Here you can view
the IP address and alias configured for the RSS 2000.
Figure 5-1 Recording Link