Filter
Top Products
Polycom RMX 1000 User Guide
16-7
Conference Control for Regular Participants
If you enter a conference as a regular participant, please wait until the
conference video appears and then press any arrow key on the remote
control to open the function menu as shown below.
Figure 16-7 Conference Control for Regular Participants
–
Main Menu
If the Limit Personal Conference Management (PCM) access to conference creator
only option is selected in the conference profile settings page, the regular participants
in the conference cannot display the PCM menu to control the conference.
Click & View
This menu option is used to set the screen layout for a participant’s endpoint.
To change the layout on the participant's endpoint screen:
1 In the PCM main menu, select Click & View to go to the interface for
selecting a layout legend.
2 Select a layout legend by pressing the up arrow/down arrow key on the
remote control, or directly press the corresponding number key of the
layout legend number.
3 Enter the layout setting status. By repeatedly pressing the right arrow
key on the remote control, you can cyclically switch between different
layouts of this legend type. For the layouts available for each legend, see
Table 16-4Layout Control Legends.
4 Press the left arrow key on the remote control for multiple times to exit
the layout setting status, and return to the conference image.
Table 16-4 Layout Control Legends
Legend Layout States and Function Description