Filter
Top Products
2-1
2
First Time Installation and
Configuration
Follow the procedure below to implement First Time Installation and
Configuration of the RMX 1000 system:
1 Hardware Installation and Setup
2 Configuration Preparations
― Get the information needed for network configuration.
― Get the product activation key.
3 First Time Configuration
― Connect a PC to the RMX 1000
― Log in to the Web interface
― Modify the default IP address
― Configure other network options
― Synchronize the system time
Hardware Installation and Setup
Install the hardware and connect lines as described below:
1 Put the RMX 1000 product on a stable surface at the installation site.
2 Carefully take the RMX 1000 device out of the package. You can install
the device in the rack or position it on an even surface.
― Mount the RMX 1000 in the rack: Install rack brackets, supplied by
the rack manufacturer, in the rack. Mount the RMX 1000 on top of
the rack brackets. Fasten the RMX 1000 to the rack with screws.