Filter
Top Products
Polycom RMX 1000 User Guide
8-5
Figure 8-4 Cascading Configuration – RMX 1000_2
Advanced Setting
Usually, you only need to set the parameters on the General tab, and accept
other default settings of the system. To set advanced parameters, click the
Advanced tab.
Figure 8-5 New Participants - Advanced
The table below explains the configuration parameters.
Table 8-2 Configuration Description of New Participants
–
Advanced
Parameter Description
Line rate
Specify the line rate of the participant’s endpoint.
Auto
indicates using the line rate specified by the RMX 1000
system.
Broadcast / Listen
Volume
Move the corresponding slider to adjust the volume
transmitted/received by the participant. Each grid increases or
decreases the sound by 3dB. The adjustable range is 1~10 (in
the ascending order), while the default value is 5dB.
E-Mail
Set the Email address used by the participant to receive
conference notices from the system. Up to 2 Email addresses
can be set by separating them with a “;”. For example, enter
address1@polycom.com; address2@polycom.com.