Chapter 16 – Personal Conference Manager (PCM)
16-2
Introduction to PCM Interfaces
Viewing the PCM Interface
To establish a call link, use the endpoint to call the IP address for RMX 1000
directly, or call the E.164 prefix or SIP URL of RMX 1000 if you have
registered to a gatekeeper or SIM server. After the connection is successfully
established, the PCM lobby of RMX 1000 will be displayed on the endpoint,
as shown below.
Figure 16-1 Interface of the PCM Lobby
Table 16-1 Description for Conference States
Status Description
No participant joins the highlighted conference, and an endpoint can
directly access it.
Some participants have joined the highlighted conference, and an
endpoint can directly access it.
The highlighted conference has a password. You must enter the
conference password to join it.
The highlighted conference is locked and permits nobody to join.
The highlighted conference has a password. You cannot joint it
through the PCM interface.
The current endpoint is unavailable in the participant list of the
conference, and this conference is configured with
Only
participants in the above participant list can dial in
(see
Participant setup).
Function
Options
Ongoing
Conference
List
Status icon of
the selected
conference
ID of Highlighted Conference
Cursor