Polycom RMX 1000 User Guide
2-5
Figure 2-5 Logging in to the RMX 1000 Web Interface
4 The Product Activation dialog box is displayed. Fill in the activation key
obtained in Obtaining Product Activation Key in the Activation Key box,
and then click the Save button. Click the Close button.
5 The system displays a message asking whether to restart the system or
not. Click Restart Now to validate the activation.
6 After the system restarts, you can enter the Administration -> License
Information interface in the Web configuration interface to check the
activated functions. For the activated functions,
is displayed, or else
is displayed.
Modify the Default IP address
After accessing the RMX 1000 Web configuration interface, you can modify
the default IP address for the device based on the settings of your local
network.
1 Click the IP Network Services configuration item in the RMX
Management pane.
2 In the IP Network Services configuration pane, double-click or right-click
LAN 1 -> Properties.
3 In the LAN1 Properties interface, set the IP address obtained from the
network administrator, and configure the device for use on your local
network.