Filter
Top Products
Polycom RMX 1000 User Guide
14-17
the system manually. When the screen displays message as shown below,
do not press the Spacebar.
Figure 14-18 Console Interface – Rebooting
5 Wait about 50 seconds, when the screen displays menu as shown below,
highlight the rescue and press Enter.
Figure 14-19 Console Interface – Highlighting Rescue
If you have no operation for 5 seconds on the above interface, the system
will automatically enter the normal mode. In that case you need to reboot
the system again to recreate the opportunity to select rescue.
6 The system remains in a startup state for approximately 1 minute. When
the screen shows the current system IP address, the system now is
running under the rescue mode successfully.