Filter
Top Products
R61509V Target Spec
Rev. 0.11 April 25, 2008, page 139 of 181
Partial Display Function
The partial display function allows the R61509V to drive lines selectively to display partial images by
setting partial display control registers. The lines not used for displaying partial images are driven at non-
lit display level to reduce power consumption.
The power efficiency can be enhanced in combination with 8-color display mode. Check the display
quality when using low power consumption functions.
G41
G60
Non-lit display area
Non-lit display area
Partial image:
20 lines
Number of lines to drive LCD: NL = 6’h35 (432 lines)
Base image display enable: BASEE = 0
Partial image display RAM area: (PTSA, PTEA) = (9’h000, 9’h013)
Partial image display position: PTDP = 9’h028
Partial image display enable: PTDE = 1
Figure 57 Partial Display
Note: See the RAM Address and Display Position on the Panel for details on the relationship between the
display positions of partial images and respective RAM area setting.