Filter
Top Products
R61509V Target Spec
Rev. 0.11 April 25, 2008, page 65 of 181
Panel Interface Control 9 (R023h)
MCPE [2:0]: Specifies VCOM alternating point. MCPE is enabled when RGB interface is selected.
Table 37
MCPE [2:0] VCOM alternating point
3’h0 Setting inhibited
3’h1 1 clock
3’h2 2 clocks
3’h3 3 clocks
3’h4 4 clocks
3’h5 5 clocks
3’h6 6 clocks
3’h7 7 clocks
Note: 1 clock = (number of data transfer/pixel) x DIVE(Division ratio) x (PCDIVL + PCDIVH)) [DOTCLK]
R/W RS IB15 IB14 IB13 IB12 IB11 IB10 IB9 IB8 IB7 IB6 IB5 IB4 IB3 IB2 IB1 IB0
R/W 1 0 0 0 0 0 0 0 0 0 0 0 0 0
MC
PE
[2]
MC
PE
[1]
MC
PE
[0]
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1