R61509V Target Spec
Rev. 0.11 April 25, 2008, page 95 of 181
Basic Mode Operation of the R61509V
The basic operation modes of the R61509V are shown in the following diagram. When making a transition
from one mode to another, refer to instruction setting sequence.
Reset
state
Display
OFF
Internal clock
display
operation
VSYNC
interface
RGB
interface (1)
RGB
interface (2)
Initial setting
Display ON sequence
(Power ON sequence)
VSYNC i/F sequence 2
(DM=10, RM=0)
RGB i/F (2) sequence 1
(DM=01, RM=0)
moving picture
display
RAM access via
system i/F while displaying
moving picture
moving picture
display
262k-color
mode
8-color
mode
Partial
display
Display color control
262k 8
color display
sequence
8 262k
color display
sequence
Exit shut down mode
Shut down
mode
DSTB = 1
Deep
standby set
RGB i/F (2) sequence 2
(DM=01, RM=1)
VSYNC i/F sequence 1
(DM=00, RM=0)
RGB i/F (1) sequence 1
(DM=01, RM=1)
RGB i/F (1) sequence 2
(DM=00, RM=0)
Partial
display
sequence 2
Partial
display
sequence 1
Display OFF sequence
(Power OFF sequence)
Reset
Figure 12