Filter
Top Products
R61509V Target Spec
Rev. 0.11 April 25, 2008, page 58 of 181
Panel Interface Control 4 (R013h)
MCPI: Defines VCOM alternating timing. This bit is enabled when displaying in synchronization with
internal clock. MCP cannot be used in RGB interface operation.
Table 28
MCPI [2:0] VCOM alternating timing
3’h0 Setting inhibited
3’h1 1 clock
3’h2 2 clocks
3’h3 3 clocks
3’h4 4 clocks
3’h5 5 clocks
3’h6 6 clocks
3’h7 7 clocks
Note: The clock is the frequency divided clock, which is set by DIVI [1:0] bits.
R/W RS IB15 IB14 IB13 IB12 IB11 IB10 IB9 IB8 IB7 IB6 IB5 IB4 IB3 IB2 IB1 IB0
R/W 1 0 0 0 0 0 0 0 0 0 0 0 0 0
MC
PI[2]
MC
PI
[1]
MC
PI
[0]
Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1