R61509V Target Spec
Rev. 0.11 April 25, 2008, page 73 of 181
Power Control3 (R102h)
Note: True values of PSON and PON are not read when instruction read is executed.
PON, PSON: Turn power supply ON. PON and PSON must be written to power supply ON and start the
internal power supply operation. Follow power supply sequencer to set PON and PSON bits.
VCMR: Selects either external resistance (VCOMR pin) or internal electronic volume (VCM[4:0]) to set
the electrical potential of VCOMH. The internal electronic volume is set by VCM bits
Table 44
VCMR0[0] VCOMH Electrical Potential setting
0 VCOMR (externally supplied)
1 Internal electronic volume
VRH[3:0]: Sets the factor to generate VREG1OUT.
Table 45
Note: Write VC and VRH bits so that VREG1OUT ≤ DDVDH-
0.5V.
R/W RS IB15 IB14 IB13 IB12 IB11 IB10 IB9 IB8 IB7 IB6 IB5 IB4 IB3 IB2 IB1 IB0
VRH
[4]
VRH
[3]
VRH
[2]
VRH
[1]
VRH
[0]
0 0
VCM
R
1 0 PSON PON 0 0 0 0
R/W 1
R/W R/W R/W R/W R/W R/W R/W W W
Default 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0
VRH[4:0] VREG1OUT
5’h00 Halt (Hiz)
5’h01-5’h0F Setting inhibited
5’h10 VCIR x 1.600
5’h11 VCIR x 1.625
5’h12 VCIR x 1.650
5’h13 VCIR x 1.675
5’h14 VCIR x 1.700
5’h15 VCIR x 1.725
5’h16 VCIR x 1.750
5’h17 VCIR x 1.775
5’h18 VCIR x 1.800
5’h19 VCIR x 1.825
5’h1A VCIR x 1.850
5’h1B VCIR x 1.875
5’h1C VCIR x 1.900
5’h1D VCIR x 1.925
5’h1E VCIR x 1.950
5’h1F VCIR x 1.975