Filter
Top Products
5.12
FAX
3
Press SAVE Toll. The display prompts you to enter the fax
number.
4
Enter the number of the remote fax machine using the
number keypad.
You can also use a one-touch dial button or press Speed then
use a 2-digit speed dial number.
5
When the number appears correctly, press Enter. The display
asks you to enter another fax number to send the document.
6
If you want to send to more than one location, select “1:YES”
and enter another fax number using the number keypad.
7
When the number appears correctly on display, press Enter.
Or
To send to one location or when you complete the last fax
number setting, select “2:NO” in the ANOTHER FAX NO.?
screen.
8
The document is scanned into memory.
If the document is fed from the document glass, the display
shows “NEXT GO ON?” on the top line after the document is
scanned into the memory. If you have the next page, remove
the scanned page and load the next page on the glass and
press Enter. Repeat as necessary.
When all pages are scanned, press Cancel/Reset when the
display shows “NEXT GO ON?.” The display shows a reminder
that a toll save transmission is reserved at the preset time.
NOTE:
To cancel the job reserved in memory, see “Cancelling a
Scheduled Operation” on page 5.38.
Transmission will start at 11:45 PM.