Filter
Top Products
5.15
FAX
Receiving Automatically in FAX Mode
Your product is preset to FAX mode at the factory. If you have
changed the fax mode, take the following steps to receive faxes
automatically:
1
Press Receive Mode until you see “FAX” on the bottom line.
Then press Enter.
2
When you receive a call, the product answers the call on a
specified number of rings and receives a fax automatically. To
change the number of rings. See “Fax Setup Options” on page
page 5.41.
To adjust the ringer volume, see “Setting Sounds” on page
page 1.41.
Receiving Automatically in ANS/FAX
Mode
For this mode, you must attach an answering machine to the EXT
jack on the back of your product (see page page 1.8).
1
Press Receive Mode until you see “ANS/FAX” on the bottom
line. Then press Enter.
2
When you receive a call, the answering machine will answer.
If the caller leaves a message, the answering machine stores
the message as it would normally. If your product hears a fax
tone on the line, it automatically starts to receive fax.