Filter
Top Products
1.44
Set Up
Power Save
Your product reduces power consumption when it is not in actual
use. This Power Save Mode setting allows you to select the length
of time the product waits after a job is printed before it switches to
a reduced power state.
1
Press Setup. The display shows “1.SYSTEM SETUP” on the
bottom line.
2
Press Enter.
3
Press the Scroll buttons ( or ) until you see “POWER
SAVE MODE” on the display and then press Enter. The current
setting displays.
4
Press the Scroll buttons ( or )until you see the desired
time on the display. The available options are 1 HOUR, 4
HOURS, 8 HOURS, and 12 HOURS.
5
Press Enter to save the selection.
NOTE:
If the product detects a document(s) in the ADF, the Power
Save mode is not activated. Do not leave documents in the ADF if not
used.