Filter
Top Products
5.32
FAX
14
If the document is fed from the document glass, the
display shows “NEXT GO ON?” on the top line after the
document is scanned into the memory. If you have the
next page, remove the scanned page and load the next
page on the glass and press
Enter
. Repeat as necessary.
When all pages are scanned, press Cancel/Reset when the
display shows “NEXT GO ON?.”
The product returns to Standby mode and the display reminds
you that you are in Standby mode and that Delayed
Transmission is set.
NOTE:
If you want to cancel the Delayed Fax, see “Cancelling a
Scheduled Operation” on page 5.38.
Priority Fax
When the Priority Send is enabled, a high priority document can be
transmitted ahead of reserved operations. The document is
scanned into the memory, then transmitted when the current
operation is concluded. In addition, the Priority Send will interrupt
a broadcast operation between stations (i.e., when transmission to
station A ends, before transmission to station B begins) or between
redial attempts.
NOTE:
You cannot use the colour fax for the priority faxing.