Filter
Top Products
1.40
Set Up
Setting the Discard Size
When receiving or copying a document as long as or longer than
the paper loaded in the paper bin, you can set the product to
discard and excess images at the bottom of the page, so that it will
fit onto the recording paper size.
NOTE:
If the Auto Reduction feature is turned ON for printing faxes,
this function is not performed.
1
Press Setup. The display shows “1.SYSTEM SETUP” on the
bottom line.
2
Press Enter.
3
Press the Scroll buttons ( or ) until you see “DISCARD
SIZE” and then press Enter.
4
Enter the desired discard size using the number keypad.
The received or copied page within the margin you set will be
discarded.
If the data is outside the margin you set, it will be printed on
two sheets of paper at the actual size.
5
Press Enter to save the selection and return to Standby
mode.