Filter
Top Products
6.13
Maintenance
7
The display prompts you to confirm a new or an old cartridge.
Press the Scroll buttons ( or ) to scroll through the
options and press Enter when your choice appears in the
display.
The available options for the right cartridge are: NEW BLACK,
OLD BLACK, NEW PHOTO, and OLD PHOTO. If you installed a
photo cartridge instead of a black cartridge, select “NEW
PHOTO” or “OLD PHOTO”.
8
The display prompts you to confirm the cartridge capacity:
Standard or High Yield. Use the Scroll buttons ( or ) to
scroll through the options and press Enter when your choice
appears in the display.
If you installed a photo cartridge, you don’t have to select the
capacity of the photo cartridge because your product supports
only a standard photo cartridge.
9
When you finish setting the cartridge(s) and if any new
cartridge is installed, the cartridge alignment procedure
begins automatically by printing the Cartridge Alignment
form.
Refer to step 5 under “Aligning Print Cartridges” on page 6.16.
If you installed an old cartridge(s), the product returns to
Standby mode without printing the Cartridge Alignment form.
NOTE:
If you reinstall the printer driver, the ink level on the Printer
Control Program may be incorrect even when you do not change the
cartridges.
Replacing Print Cartridges from the Computer
1
Click
Start
>
Programs
>
Samsung SCX-1150 Series
>
Printer Control Program. You have accessed the Samsung
SCX-1150 Series Control Program.
2
Select the Cartridges tab. Click Install/Change Cartridge.
3
Open the cartridge door and replace the old cartridge(s) by
following the instructions on page 6.11.