Filter
Top Products
5.20
FAX
Automatic Dialling
One-touch Dialling
One-touch dialling lets you use any of the 10 one-touch buttons to
automatically dial a number.
Storing a Number for One-touch Dialling
1
Press and hold one of ten one-touch buttons for about 2
seconds. The display shows “Txx:,” where xx represents the
selected one-touch button number.
If a number is already stored in the location you chose, the
display shows the number. To replace the number with other
phone number, select “1:RENEW”. Otherwise, select
“2:OTHER” to select other one-touch dial location.
2
Enter the number you want to store by using the number
keypad and then press Enter.
To insert a pause between numbers, press Redial/Pause. “P”
appears on the display.
If you make a mistake while entering a number, press
Search/Delete and re-enter the correct number.
3
To assign a name to the number, enter the desired name. For
information on how to enter names, see “How To Enter
Characters Using the Number Keypad” on page page 1.37.
Or,
If you do not want to assign a name, skip this step.
4
Press Enter when the name appears correctly or simply
without entering a name.