1.15
Set Up
6
Unwrap and remove the black print cartridge from its plastic
bag. Holding the cartridge at the top, carefully remove the
sealing tape covering the print head.
Place the black print cartridge into the right side of the holder.
7
Push the black print cartridge back until it clicks into place.
8
After installing the print cartridges, close the cartridge door.
NOTE:
If the display shows “REMOVE PAPER JAM AND PRESS
CANCEL” when you have closed the cartridge door, re-install the
cartridge(s). With the print cartridge(s) installed improperly, the
product might not print.