Filter
Top Products
1.10
Set Up
5
Connect the power cord.
Plug one end of the supplied three-wire electrical grounding
type cord into the back of the product and the other end into a
properly grounded AC outlet.
As you plug it in, your product will turn on. “POWERING UP
PLEASE WAIT” appears on the display indicating the product is
on. To view your display text in another language, see page
1.39.
If you want to turn your product off, unplug the power cord.
NOTES:
When you first set up the product, you see “CHECK
CARTRIDGES” on the display. Load the paper (see page 1.11), then
install the print cartridges (see page 1.13).