Filter
Top Products
5.18
FAX
Using Fax Forwarding
You can set your product to forward incoming faxes to another fax
number during a specified time period. When the fax arrives at your
product, it is stored in memory. Then, your product dials the fax
number you have specified and sends the fax.
If it cannot forward a fax after repeated attempts because of an
error, such as the number being busy and redials failed, your
product will print the fax. If it runs out of memory while receiving
a fax, it will terminate the incoming fax and only forward the partial
pages already stored in memory.
You can also select the fax forwarding option which allows you to
print the fax on your product if fax forwarding is completed without
an error.
To use fax forwarding, take the following steps:
1
Press FAX Forward.
2
Select the fax forwarding option by pressing FAX Forward or
the Scroll buttons ( or ). The following options are
available:
FORWARD: forwards the fax to a specified number. Your
product does not print the fax.
FORWARD&PRINT: forwards the fax to a specified number
and prints the fax on your product.
OFF: turns the fax forwarding off.
3
Press Enter to save the selection.
4
If you choose to forward faxes, enter the fax number where
you would like the fax to go, and then press Enter to save
your selection.
5
Enter the date using the number keypad you want to start
forwarding incoming faxes and then press Enter.