Filter
Top Products
Appendix B Using the Tools & Drivers CD B-5
3. Ensure that the OS on the platform is shut down.
4. Log in to the Sun Fire X2250 ILOM CLI with Administrator privileges.
5. Type the following command to download the new ILOM SP firmware image:
-> load -source tftpURL
For example:
-> load -source tftp://<ipaddress>/x2250-xxx_xxxx.pkg
6. Type y to load the specified file.
7. Type y to preserve your ILOM configuration settings. If not, the settings will be
overwritten by the firmware default.
The ILOM SP firmware is updated.
Note – During the upgrade process, the login prompt will appear. Do not attempt to
log in until the flash update has completed.
B.3.2 ILOM Web Interface
You can update ILOM SP firmware using the ILOM web interface to flash the SP. See
the Sun Integrated Lights Out Manager 2.0 User’s Guide (820-1188) for more information
on setting up and using the ILOM software.
B.3.2.1 Updating SP Firmware
1. Start the ILOM SP web interface by typing the IP address of the SP into a
browser.
2. Copy the file /remoteflash/version/SP_file from the remoteflash directory
located on the Tools & Drivers CD to the remote system that is running the
ILOM web interface.
Where version is the version of the Tools & Drivers CD that you are using and
SP_file is the name of the SP image.
For example: /remoteflash/1.0/x2250-xxx_xxxx.pkg
3. Ensure that the OS on the platform is shut down
4. Log in to the SP ILOM web interface with Administrator privileges.