Filter
Top Products
C-2 Sun Fire X2250 Server Service Manual • April 2009
C.1 Disassembling the Slide Rails Before
Installation
Use this procedure to remove the mounting brackets from the slide-rail assemblies.
1. Unpack the slide rails.
2. Locate the slide rail lock at the front of one of the slide rail assemblies, as
shown in
FIGURE C-1.
3. Squeeze and hold the tabs at the top and bottom of the lock while you pull the
mounting bracket out of the slide-rail assembly until it reaches the stop. (See
FIGURE C-1).
4. Push the mounting bracket release button toward the front of the mounting
bracket, as shown in
FIGURE C-1, and simultaneously withdraw the mounting
bracket from the slide-rail assembly.
5. Repeat for the remaining slide-rail assembly.
FIGURE C-1 Disassembling the Slide Rail Before Installation
Mounting bracket
release button
Slide-rail lock