Contents vii
A.4 Serial Connector Pin Assignments A–4
B. Using the Tools & Drivers CD B–1
B.1 Tools & Drivers CD Contents B–1
B.2 Updating BIOS B–2
B.2.1 Updating Sun Fire X2250 BIOS Using the DVD Drive B–2
B.2.2 Updating Sun Fire X2250 BIOS From a Remote Client B–3
B.3 Updating SP Firmware B–4
B.3.1 ILOM CLI B–4
B.3.1.1 Updating ILOM SP Firmware Using the CLI B–4
B.3.2 ILOM Web Interface B–5
B.3.2.1 Updating SP Firmware B–5
B.4 Booting the Tools & Drivers CD From a PXE Server B–7
B.4.1 Setting up the Tools & Drivers CD Image on the PXE Server B–7
B.4.1.1 Setting Up the PXE Server B–7
B.4.2 Accessing the Tools & Drivers CD From the Target Sun Fire X2250
Server B–10
B.4.2.1 Accessing the Tools & Drivers CD From the Target
Server B–10
B.5 Intel PROSET Driver Software B–11
B.5.1 Installing the Intel PROSET Driver Software B–11
B.6 Updating FRU PROM When the System Mainboard is Replaced B–11
C. Installing the Server Into a Rack With Optional Slide Rails C–1
C.1 Disassembling the Slide Rails Before Installation C–2
C.2 Installing the Mounting Brackets Onto the Server C–3
C.3 Attaching the Slide-Rail Assemblies to the Rack C–4
C.4 Installing the Server Into the Slide-Rail Assemblies C–7
C.5 Installing the Cable Management Assembly C–9
C.6 Verifying Operation of the Slide Rails and CMA C–16