Filter
Top Products
Appendix C Installing the Server Into a Rack With Optional Slide Rails C-9
Caution – Verify that the server is securely mounted in the rack and that the slide-
rails locks are engaged with the mounting brackets before continuing.
C.5 Installing the Cable Management
Assembly
Use this procedure to install an optional cable management assembly (CMA).
1. Unpack the CMA parts.
2. Take the CMA to the back of the equipment rack and ensure that you have
adequate room to work around the back of the server.
Note – References to “left” or “right” in this procedure assume that you are facing
the back of the equipment rack.
3. Locate the CMA rail extension and insert it into the left slide rail until the
extension locks into place with an audible click. (See
FIGURE C-7.)
The CMA rail extension might be taped to the CMA assembly.