Sun Microsystems X2250 Server User Manual


 
3-12 Sun Fire X2250 Server Service Manual April 2009
9. Type Y to erase the data and the partition.
10. Repeat Step 6 through Step 9 until all partitions have been deleted.
11. Press the Esc key to exit, and press any key to reboot the server.
3.6.2 Adding a Diagnostic Partition to the First Bootable
Disk
Pc-Check can view only the first or second hard disk on the system from the boot
loader. The software automatically installs the diagnostic partition on the first
bootable disk.
To add the diagnostic partition on the first bootable disk:
1. Insert the Tools & Drivers CD into the DVD tray.
2. Reboot the server.
3. At the Tools & Drivers CD main menu, type 1 to run Hardware Diagnostics.
4. From the main menu, choose Create Diagnostic Partition.
If the first bootable disk is clear of partitions, the Sun Microsystems Partitioning
Utility window appears. It states: “Your primary hard disk is not partitioned.
Would you like to partition it now?”
Select Yes and press Enter.
A window appears, stating, “Partitioning complete. Your machine will now be
restarted.”
If the first bootable disk is not clear of partitions, a window appears stating that
the software is unable to create a hardware diagnostic partition because there are
already partitions on the disk.
If this happens, go to Section 3.6.1, “Removing Existing Partitions From a Hard
Disk” on page 3-11 to remove the partitions from the disk.
Repeat Step 1 through Step 4 of this procedure.
5. Press Enter to reboot your server.
3.6.3 Creating a Log File on the Diagnostic Partition
All the scripts that are loadable with the hardware diagnostics software are
predefined, with logging to the diagnostic partition enabled. The names of log files
correspond to the name of the script. For example, a script named noinput.tst
creates a log file named noinput.jrl.