Filter
Top Products
C-8 Sun Fire X2250 Server Service Manual • April 2009
1. Push the slide rails into the slide-rail assemblies in the rack as far as possible.
2. Raise the server so that the rear ends of the mounting brackets are aligned with
the slide-rail assemblies that are mounted in the equipment rack. (See
FIGURE C-6.)
3. Insert the mounting brackets into the slide rails, then push the server into the
rack until the mounting brackets encounter the slide-rail stops (approximately
12 inches, or 30 cm).
FIGURE C-6 Inserting the Server With Mounting Brackets Into the Slide Rails
4. Simultaneously push and hold the slide-rail release buttons on each mounting
bracket while you push the server into the rack. (See
FIGURE C-6.) Continue
pushing until the slide-rail locks on the front of the mounting brackets engage
the slide-rail assemblies.
You will hear an audible click.
Mounting bracket
inserted into
slide rail
Slide-rail
release button
Slide-rail
assembly
mounted on
rack post
Slide-rail
lock