3-16 Sun Fire X2250 Server Service Manual • April 2009
3.6.6 Accessing the Diagnostic Partition on the
Windows Server 2003 Operating System
The Windows 2003 Server operating system does not allow you to mount a
diagnostic partition. There is no way to view or gain access to the diagnostic
partition if you are running Windows on a Sun Fire X2250 server.
The only way to retrieve the contents (log files) on the diagnostic partition is to
attach a USB diskette drive to the Sun Fire X2250 server and complete the following
procedure.
1. Connect the USB diskette drive to any USB port on the Sun Fire X2250 server.
2. Insert the Tools & Drivers CD into the DVD tray.
3. Reboot the server.
4. At the Tools & Drivers CD main menu, type 3 to exit to DOS.
5. Type the following at the DOS command prompt:
6. Copy the log file to the diskette.
For example, to copy a file named noinput.jrl to the diskette, type:
The journal file is now saved to the diskette in the USB diskette drive.
3.7 Show Results Summary
The summary lists the tests run and shows the results. Pass, Fail, or N/A is listed for
each option.
The following is a complete listing of all options that are available with the Tools &
Drivers CD. If your own system does not have all of these options, they might not be
listed when the Show Results Summary is displayed.
■ Processor
This section shows the following tests conducted against the processor: Core
Processor Tests, AMD 64-Bit Core Tests, Math Co-Processor Tests – Pentium
Class FDIV and Pentium Class FIST, MMX Operation, 3DNow! Operation, SSE
Instruction Set, SSE2 Instruction Set, and MP Symmetry.
C:> d:
D:> copy d:\noinput.jrl a:\