Filter
Top Products
4-26 Sun Fire X2250 Server Service Manual • April 2009
4.5.8.2 Installing the Fan Module
To install the system fan module:
1. Position the fan so that the arrow on top of the fan casing is facing the middle
chassis divider.
2. Place the fan module in the chassis so that it fits over the small guideposts.
FIGURE 4-23 Installing the Fan Module
3. Gently push the fan down to secure it to the chassis.
4. Connect the fan connector to the appropriate connector on the fan harness.
5. Check the routing of all cables for obstructions, and then reinstall the cover.
4.5.9 Replacing the Dual Blower Module
The following procedures describe how to replace the dual blower module.
4.5.9.1 Removing the Dual Blower Module
To remove the dual blower module: