4-32 Sun Fire X2250 Server Service Manual • April 2009
FIGURE 4-29 Installing a DIMM
4. Using both thumbs, press the DIMM straight down into the DIMM slot until
both ejector levers click, locking the DIMM in the DIMM slot.
■ The DIMMs must be inserted evenly, straight down along the DIMM slot until
locked into place.
■ The DIMM is seated when you hear a click and the DIMM ejector levers are in the
vertical position.
Note – The manufacturer and capacity of both modules in the same memory bank
(Banks A0–A1, B0–B1) must be identical.
5. Check the routing of all cables for obstructions, and then reinstall the cover.