Sun Microsystems X2250 Server User Manual


 
4-24 Sun Fire X2250 Server Service Manual April 2009
FIGURE 4-21 Installing the Power Supply
4. Connect three of the power supply cables to the motherboard. See FIGURE 4-38.
5. Reinstall the cable clips to the power supply cables.
This ensures that the power supply cables will not obstruct the CPU airstream.
6. Perform the following procedures to reconnect the power supply to the hard
disk drives (HDDs).
a. Squeeze the tabs on the connector and push it through the cut out in the
chassis bulkhead.
a. Reconnect the HDD power harness plug to the power supply unit.