Chapter 4 Maintaining the Sun Fire X2250 Server 4-19
4. Pull the ODD drive out the front of the chassis.
Caution – Move the assembly by grasping it by its sides. Do not push on the
DVD-ROM tray.
4.5.5.2 Installing the ODD Drive Assembly
To install the ODD (DVD or CD) drive assembly:
1. If necessary, remove the filler panel in front of the ODD drive slot on the front
panel.
Put your finger or a screw driver behind the slot on the right side of the filler
panel and pull the panel outward.
FIGURE 4-16 Removing the ODD Filler Panel
2. Position the ODD drive in front of the ODD drive slot on the front panel.
3. Push the ODD drive into the drive slot until the drive clicks into place.