Filter
Top Products
4-8 Sun Fire X2250 Server Service Manual • April 2009
4.5.1.2 Installing the I/O Board
To install the I/O board:
1. Position the I/O board on top of the HDD cage so the openings on the board
line up with the guides on top of the HDD cage.
FIGURE 4-4 Installing the I/O Board
2. Reconnect the cables.
3. Gently push the I/O board down to engage the guides and push the board
forward to secure it.
4. Fasten the screws to secure the I/O board to the mounting bracket.
5. Check the routing of all cables for obstructions, and then reinstall the cover as
described in Section 4.3, “Powering Off the Server and Removing the Cover” on
page 4-3.