Filter
Top Products
Appendix C Installing the Server Into a Rack With Optional Slide Rails C-3
C.2 Installing the Mounting Brackets Onto
the Server
Use this procedure to install the mounting brackets onto the sides of the server.
1. Position a mounting bracket against the chassis so that the slide-rail lock is at
the server front, and the three keyed openings on the mounting bracket are
aligned with the three locating pins on the side of the chassis.
FIGURE C-2 Aligning the Mounting Bracket With the Server Chassis
2. With the heads of the three chassis locating pins protruding though the three
keyed openings in the mounting bracket, push the mounting bracket toward the
front of the chassis until the mounting-bracket clip locks into place with an
audible click. (See
FIGURE C-2.)
3. Verify that the rear locating pin has engaged the mounting-bracket clip. (See
FIGURE C-2.)
Chassis front
Slide-rail lock
Mounting-
Mounting bracket
bracket clip