Toshiba e-STUDIO500P Printer User Manual


 
Diagnostic information 2-15
920 .92 Hot roll fell too far below
desired temperature
while printing. Fuser
page count not
available.
Bad thermistor, circuit, or cabling.
Noisy thermistor signal.
Fuser not receiving AC power.
Poor supply line voltage.
Excessive load on the fuser.
Low voltage or incorrect lamp.
Incorrect hot roll.
Go to “920.xx—Cold fuser
service check” on page 2-87.
920 .93 Hot roll too cool while
checking for slope
change. Fuser page
count not available.
Bad thermistor, circuit, or cabling.
Noisy thermistor signal.
Fuser not receiving AC power.
Poor supply line voltage.
Excessive load on the fuser.
Low voltage or incorrect lamp.
Incorrect hot roll.
Go to “920.xx—Cold fuser
service check” on page 2-87.
920 .94 Hot roll too cool when
heating to desired
temperature after slope
change. Fuser page
count not available.
Bad thermistor, circuit, or cabling.
Noisy thermistor signal.
Fuser not receiving AC power.
Poor supply line voltage.
Excessive load on the fuser.
Low voltage or incorrect lamp.
Incorrect hot roll.
Go to “920.xx—Cold fuser
service check” on page 2-87.
920 .96 Fuser is not increasing
in temperature even
though the lamp has
been on for an extended
time. Fuser page count
not available.
Fuser is not receiving AC power.
Poor supply line voltage.
Go to “920.xx—Cold fuser
service check” on page 2-87.
920 .97 Fuser has been below
the desired temperature
for too long while media
is in the nip. Fuser page
count not available.
Bad thermistor, circuit, or cabling.
Very noisy thermistor signal.
Fuser not receiving AC power.
Poor supply line voltage.
Excessive load on the fuser.
Low voltage or incorrect lamp.
Abrupt change in temperatures that
has disrupted control.
Go to “920.xx—Cold fuser
service check” on page 2-87.
922 .02 Hot roll took too long to
reach the beginning
lamp detection
temperature. Fuser
page count between 0
and 99,999.
Low wattage or incorrect lamp.
Bad thermistor, circuit, or cabling.
Fuser not receiving sufficient AC
power.
Poor supply line voltage.
Go to “922.xx—Cold fuser
check” on page 2-89.
Service error codes (9xx.xx) (continued)
Error
code
Sub
codes
Display text Description Action