Filter
Top Products
2-40 Service Manual
52 .xx Flash Full This message displays when there is not enough free space in the flash
memory to hold the resources that have been requested to be written to
flash.
53 .xx Unformatted Flash This message displays when the printer detects an unformatted flash at
power on. Press to clear the message. The flash is marked as bad and
normal operation continues. Flash operations are not allowed until the flash
is formatted.
54 .xx Standard Network
Software Error
This error displays when a network port is detected, but the printer cannot
establish communications with it.
54 .xx Network x
Software Error
This error displays when a network port is detected, but the printer cannot
establish communications with it.
55 .xx Unsupported option in
Slot x
An unsupported option is installed in the specified solutions port. Power off
the printer and remove the unsupported option in the specified slot.
55 .xx Unsupported Flash in
Slot x
An unsupported flash option is installed in the solutions port. Power off the
printer and remove the unsupported flash option in the specified slot.
56 .xx Standard Serial
Disabled
This error displays when data is sent to the printer across the standard serial
port, but the port has been disabled.
56 .xx Serial Port x Disabled This error displays when data is sent to the printer across an optional parallel
port, but the port has been disabled. Once this message displays, reporting
of further errors is suppressed until the menus are entered, or the printer is
reset.
56 .xx Standard USB Port
Disabled
Displayed when status is requested over the USB port, but the port has been
disabled. Once the error has been displayed for the first time, reporting of
further errors is suppressed until the menus are entered or the printer is
reset.
The following actions may be taken:
• Press to clear the message. The printer discards any data received
on the USB port.
• Press until Busy/Waiting appears. The following are available:
- Reset Printer
- Reset Active Bin
56 .xx Standard USB Port x
Disabled
Displayed when status is requested over the USB port indicated, but the port
has been disabled. Once the error has been displayed for the first time,
reporting of further errors is suppressed until the menus are entered or the
printer is reset.
The following actions may be taken:
• Press to clear the message. The printer discards any data received
on the USB port.
• Press until Busy/Waiting appears. The following are available:
- Reset Printer
- Reset Active Bin
User attendance messages (continued)
Error
code
Sub
code
Primary message Description/action