Filter
Top Products
Diagnostic information 2-41
56 .xx Standard Parallel Port
Disabled
This error is displayed when data is sent to the printer across the parallel
port, but the parallel port has been disabled. Once this message is
displayed, reporting of further errors is suppressed until the menus are
entered, or the printer is reset. The following actions may be taken:
• Press to clear the message. The printer discards any data received
on the parallel port.
• Press until Busy/Waiting appears. The following are available:
- Reset Printer
- Reset Active Bin
56 .xx Parallel Port x Disabled This error is displayed when data is sent to the printer across the parallel
port, but the parallel port indicated has been disabled. Once this message is
displayed, reporting of further errors is suppressed until the menus are
entered, or the printer is reset. The following actions may be taken:
• Press to clear the message. The printer discards any data received
on the parallel port.
• Press until Busy/Waiting appears. The following are available:
- Reset Printer
- Reset Active Bin
57 .xx Configuration Change The printer has attempted to restore the Print and Hold jobs from the disk
and found that some or all of the jobs could not be restored. The printer
could not restore jobs from the disk because the configuration of the printer
has changed. This message alternates with the secondary message, Held
jobs may not be restored.
Some configuration changes that may cause this condition are:
• Code version change
• Paper handling option is removed
• Disk has been moved to a different model printer.
Press to clear the message. Some of the Print and Hold jobs stored on
the disk will not be restored. They remain on the disk, but cannot be
accessed.
58 .xx Too Many Trays
Attached
This error code displays when too many input trays are attached to the
printer.
58 .xx Too Many Disks
Installed
This error displays when too many disks are attached to the printer.
59 .xx Incompatible Output
Bin x
An incompatible output bin is installed. For Output Bin x, x=1, 2, or 3.
Remove the incompatible output bin and press to clear the message.
Note: If the user installed the incompatible device to satisfy a Check Device
Connections/reattach message, the user should reinstall an associated
compatible option or hot unplug the option.
59 .xx Incompatible Envelope
Feeder
An incompatible envelope feeder is installed.
Remove the incompatible feeder and press to clear the message.
Note: If the user installed the incompatible device to satisfy a Check Device
Connections/reattach message, the user should reinstall an associated
compatible option or hot unplug the option.
User attendance messages (continued)
Error
code
Sub
code
Primary message Description/action