Filter
Top Products
Appendix A Command Summary
PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A A-2
General
Server
Commands
CLear FAtal
Deletes fatal error log
CLear PAssword
Remove console password
CLear POrt portname JOB
Clears current entry in the print server's internal queue for the specified portname (P1 for the first parallel port,
S1 for the first serial port, P2 for the second parallel port, and S2 for the second serial port)
CLear SERVEr STRing n
Remove BOT/EOT string (see Appendix B)
EXIT/^D
Exits print server console
HElp
Provides information on available commands
SET DEFAULT
Sets print server parameters to factory defaults
SET LOAD DIsable
Disables firmware reload after exit
SET LOAD ENable
Enables firmware reload after exit
SET LOAD HOst <name>
Sets node name of boot host for (NetWare firmware load)
SET LOAD IP aa.bb.cc.dd
Sets IP address of load host (TCP/IP firmware load)