Filter
Top Products
Section 2 Print Server Management Utilities
PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A 2-2
TROY
WebXAdmin
Utility
Accessing the
WebXAdmin
Utility
TROY Print
Server
Command
Console
WebXAdmin allows you to configure the print server with a standard web browser like Netscape Navigator or
Microsoft Internet Explorer. It can therefore be used on any operating system that supports web browser
capabilities. To use WebXAdmin, you must first make sure that you have a web browser installed on your
computer and that you have configured an IP address in both the computer and the print server. Also make sure
that you have configured your TCP/IP stack to communicate over the local area network (rather than via a PPP
dial-up connection).
To use the WebXAdmin utility, start your web browser and enter the IP address of the print server as the
destination web site. Once you are connected, enter the password (ACCESS is the default password) and select
the protocol or other item that you wish to configure. You will then be connected to the appropriate web page for
configuration of that item. You may use the normal browser buttons to move forward and back through the web
pages.
All TROY print servers support a sophisticated command-line-oriented console for configuration and
management. This console contains features that are not available through WebXAdmin, including sophisticated
diagnostic capabilities. The TROY print server command console can be accessed via TELNET and the TROY
XCONFIG NetWare Utility. It is also available through one of the web pages using the WebXAdmin Utility.
The general configuration procedure is the same regardless of which method is used.