Filter
Top Products
Section 4 Novell NetWare Network Configuration
PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A 4-7
Configuring the
Print Server in
Bindery Queue
Server Mode
Using
ExtendView
(cont.)
5. Click on the Netware Bindery tab. Select your NetWare default file server. The print server name is
TWC_xxxxxx_P1, where xxxxxx are the last 6 digits of the MAC address. You may leave it as is or change
it to something else. It is recommended that you do not change the print server name.
6. For available queues, you will see your NetWare file server. If there is a queue already created, you will see
“+ “ next to your file server name indicating that you can expand it to list all available queues. You can select
an existing queue or create a new one.