Appendix D Glossary
PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A D-16
Queue Server
In Novell NetWare, a queue server is basically the same as a NetWare print server. Queue Server mode is a
NetWare printing method in which the printer is directly connected to the print server with no PSERVER NLM
installed on the file server.
rarp
Reverse Arp, a standard TCP/IP method of determining a device’s IP address based on its Ethernet address.
Raw TCP port
A type of TCP port (see TCP port) in which data is passed unmodified to the receiving node.
RCONSOLE
A NetWare utility program that allows a workstation user to access the file server console.
Remote Console
A method of accessing the print server console remotely via protocols like TELNET or NCP for configuration
and management purposes.
Remote Printer
In Novell NetWare, a remote printer is a device that connects a printer to a NetWare print server via a network
connection rather than through the parallel or serial port of the print server.
Repeater
A network device that connects two or more network segments together and provides the additional function of
strengthening and reshaping the electrical signals, thereby allowing the network to be extended over greater
distances.
Reset
In printing, a reset is a one or more characters sent after a print job. Usually, the purpose of a reset is to restore
the printer back to its normal state.
RJ45
A type of modular jack connector similar to a telephone connector but with eight wires. Used for 10baseT
Ethernet connections and for serial port connections.