Filter
Top Products
Section 2 Print Server Management Utilities
PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A 2-4
HP JetAdmin
Utility
HP Web
JetAdmin
Utility
NOTE: The TROY PocketPro 100S works transparently with the HP (Hewlett-Packard) JetAdmin utility; however,
this utility has been discontinued and is no longer available for download from the HP web site.
The TROY PocketPro 100S will appear in the list of configured print servers unless IPX is not running on the
computer and the print server is not configured with a valid IP address. If this is the case, select Device from the
menu bar and click on New. Select the desired print server from the list of unconfigured devices, and then press
Configure. Enter the requested information, including the IP address, subnet mask, and gateway, and then click
on Close to return to the list of configured print servers.
You may now select the print server from the list, and click on the Modify button (or select Device, and then
Modify from the menu bar) to change the print server configuration.
Once you are connected and are at the Web JetAdmin home page, click on the Find Device tab, and then click on
Find All Devices to get a list of all Web JetAdmin-compatible print servers (or you may limit your search by
using the Advanced Search method). Click on the desired TROY print server name, and the Properties page will
be displayed for that print server. Click on the Config tab to configure the print server.