Filter
Top Products
Appendix A Command Summary
PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A A-6
General
Server
Commands
(cont.)
AppleTalk
Commands
UNPROtect
Allows system manager to temporarily access SET commands when remote console is in protected mode (See
SET PROTECTION command). The SET DEFAULT command can be used to permanently disable the
protected mode.
ZEro
Zeroes statistical counts.
SET APpletalk [EN|DIS]
Enables or Disables Appletalk Processing
SET APpletalk ZOne "<name>"
Set Appletalk zone name
SET LOCaltalk [EN|DIS]
Enables/disables LocalTalk port
SET APpletalk [EN|DIS]
Enables/disables Appletalk processing
SET SERVIce <servicename> APP [EN|DIS]
Enables or disables AppleTalk jobs on specified service
SET SERVIce <servicename> ATYPE <string>
Sets AppleTalk type
SET SERVIce <servicename> RECEIVE [EN|DIS]
Enables or Disables bidirectional communications on service.
SHow APpletalk
Shows AppleTalk parameters
SHow LOCaltalk
Shows LocalTalk parameters