Filter
Top Products
Appendix C Reloading the Firmware
PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A C-5
Downloading
New
Firmware
Using the
XAdmin32
Utility in
Windows
The PocketPro 100S firmware can also be upgraded using the XAdmin32 utility, which is available for download
from the TROY web site (www.troygroup.com/wireless). Perform the following steps to upgrade the PocketPro
100S firmware using the XAdmin32 utility.
1. Right-click on the print server to be upgraded in the list, and then select Load Firmware.
2. If you are using TCP/IP to upgrade, select TFTP PUT from this host. If you are upgrading using IPX/SPX
on a NetWare network to upgrade, select Netware GET from a server (If you are using Netware to upgrade,
you need to put the .bin firmware file in the LOGIN directory of the Netware server). Click on OK.
3. If you selected TFTP PUT from this host in Step 2, enter the configuration password (the default password is
ACCESS), and then click on Browse to find the .bin firmware file you downloaded. Click on Load. The
firmware on your PocketPro 100S will be upgraded to the new version.
4. If you selected Netware GET from a server in Step 2, enter the configuration password (the default password
is ACCESS). Enter the name of the Netware server where you saved the .bin file as the Host Name. Enter
the name of the firmware file for File. Click on OK. The firmware on your PocketPro 100S will be upgraded
to the new version.