Filter
Top Products
Section 2 Print Server Management Utilities
PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A 2-3
Using TELNET
Commands
Using XCONFIG
Commands
To connect to the print server using TELNET on UNIX, Windows NT, or most other TCP/IP systems, type the
following command at the UNIX system prompt:
TELNET ipaddress
The ipaddress is the IP address of the print server. When you are connected, push RETURN or ENTER to get
the "#" prompt, enter the password ACCESS (it will not echo), and type anything in response to the Enter
Username> prompt. When you get the Local> prompt, you are ready to enter commands.
To connect to the print server using the TROY XCONFIG NetWare Utility, insert the TROY Print Server
Software CD in your CD-ROM drive, browse the CD contents and look for XCONFIG.
If you have only one print server, you will be immediately connected. If you have more than one print server,
you will be given a list of available print servers. Type the number of the print server you want to connect to.
When you are connected, enter the password ACCESS (it will not echo) at the "#" prompt, and type anything in
response to the Enter Username> prompt. When you get the Local> prompt, you are ready to enter commands.