Filter
Top Products
Appendix A Command Summary
PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A A-11
TCP/IP
Commands
SET IP ACcess [EN|DI|ALL] aa.bb.cc.dd {MAsk ee.ff.gg.hh}
Allows or prevents specified IP address from accessing print server.
SET IP ADdress aa.bb.cc.dd
Sets IP address of print server
SET IP BAnner [EN|DIS]
Enables or Disables trailing banner page for lpr/lpd jobs
SET IP BOot n
Number of DHCP/BOOTP/RARP tries
SET IP CHKSUM [EN|DIS]
Enables or disables IP receive checksum
SET IP [EN|DIS]
Enables or Disables IP Processing
SET IP FTime [EN|DIS]
Enables or disables fast timeout
SET IP KEepalive n
Sets IP keepalive timer in minutes
SET IP MEthod [AUTO|BOOTP|RARP|STATIC]
Sets method of getting IP address
SET IP PIng aa.bb.cc.dd
Test connection to IP host
SET IP RArp nn
Sets procedure used by print server when obtaining its IP address. By default, the IP address is set along with a
default subnet mask and a router address that is the same as the address of the load host. By setting nn to 1, the
subnet mask is not set. If nn is set to 2, the router address is not set. If nn is set to 3, neither the subnet mask nor
the router address is set.