Filter
Top Products
Section 4 Novell NetWare Network Configuration
PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A 4-49
Configuring
the Print
Server and
Print Queue
in Remote
Printer Mode
Configuring the
Print Server for
Remote Printer
Mode Using
NWAdmin
To configure the TROY PocketPro 100S for remote printer mode, two basic steps are required. First, you must
use Novell's NWAdmin or PCONSOLE to add the print queue to the NetWare server. Then you must configure
the print server for remote printer operation using ExtendView, XAdmin32, WebXAdmin, JetAdmin, or the print
server console.
NOTE: You cannot configure both Queue Server and Remote Printer mode on the same print server port.
To configure the TROY Pocket Pro100S print server for remote printer mode using NWAdmin in Windows
2000/XP, perform the following steps:
1. Start NWAdmin and select the desired Container Object that will contain the new print server. Select Object
Create to create a print server.